Q32型號輪胎式拋丸清掃機

◆車輛的特點 Product features

本履式拋丸機廠家更適合多品種，大中批量化生產的鏜孔的外層去銹或拋丸淬煉，清掃鏜孔肯定都是怕對撞的單重在150kg下類的鑄件及熱解決件，這手機既可單機手游選擇，又可配線選擇. 應屬精鑄機器依據。

定時：將軸類零件產品加進橡塑履帶輥筒中，運營工作人員按過“運營”按健，拋丸室門油路分配器啟用，拋丸消除開使，履帶向前看運營，軸類零件產品不息地來翻滾，全力拋丸器將拋丸高速的拋射入真正翻滾的軸類零件產品漆層上，軸類零件產品可徹底光滑地贏得消除。鋼丸采用履攜帶的溜孔進入到螺旋運動推送機，再將鋼丸推送回斗式提高機，經斗式提高機提高到區分器，被區分后儲備備用。拋丸截止后，拋丸室門定時切換，履帶倒置，將軸類零件產品卸出。

人工：什么是服務器是應用飛速退回的水輪將彈丸拋向履帶內不間斷反轉的部件上，導致提升清潔部件的目標。它符合于各行各業業中的小行鑄件、鍛件、冷擠壓件、小齒輪、板彈簧等件的清砂、去銹、去空氣氧化皮和外壁精煉。該機械設備是整體國內外科技，設計的開放的新護膚品，也是種清潔使用率好、節構緊促、躁音小、成套配電柜性好的清潔機械設備。

This machine is suitable for various  large and medium-sized batch production of workpiece surface derusting or peen-forming strengthening, clean up the work-piece must be not afraid of the collision of the single is is 150 kg of the casting and heat treatment, the machine can not only a single use, and wiring use. Belong to casting machinery.

Automatic: the workpiece in rubber crawler roller, the operating personnel press "run" button,  shot room door close behind, pneumatic blast cleaning began to run forward, tracked, workpiece constantly, efficient and powerful shot peen-forming high-speed mixer trajectory to is back on the surface of workpiece, workpiece can completely evenly clear. Steel shot through the crawler sneak into the hole, then screw conveyor will be sent to the steel shot a hoist, a type of the hoist to ascend to the separator, separated by storage to use. Is shot ended, is shot room door open automatically, tracked reversal, discharged the workpiece.

Manual operation: This machine uses high-speed rotary projectile impeller will throw to turn over the workpiece in continuous caterpillar, so as to achieve the purpose of cleaning up the workpiece. It is used in the industries of small-sized castings, forgings, stamping, gear, springs, and a rust-removing, derusting, to oxide skin and surface strengthening. This machine is comprehensive technology, the development of domestic and foreign design new products, it is a kind of cleaning efficiency high, compact structure, the noise is small, systematic good cleaning equipment.

◆的產品共同點 Product features

1.遠程服務器選擇了懸臂離心法式拋丸器，都具有運用使用使用壽命長和型式簡略等優點和缺點。

2.采用了BE型溶合法器，擁有優異的溶合法的效果和產生率，對提供葉尖有積極主動的功用。

3.選擇袋式濾塵器，粉塵溶液濃度排放出溶液濃度低過中國設定的標，大地面減少了操作的者的工作的環境。

4.進行耐腐蝕橡塑履帶，調低了對類件的相碰及損害狀態，降低了了產品的低頻噪音。

1. The machine adopts the cantilever centrifugal peen-forming device, with long service life and simple structure.

2. The BE separator has the good separation results and higher productivity, which has positive effec to the blade.

3. The bag filter, dust emission concentrations below the standards prescribed by the state, have greatly improved operator working environment.

4. The wear-resisting rubber crawler, less on the collision and damage, reduce the noise of the machines.

◆適合超范圍 Applicable scope

      壓鑄件、精密儀器鑄造鑄件、精密儀器鑄造鍛件等的清掃、光飾。祛除熱清理件、鑄件、鍛件的表層鈍化皮。壓簧的增強。緊固連接件除銹解決和前清理。

1、定義歐洲德國一百三五朝代末的噴砂機實行國廠化加工。

2、選取直聯強勢拋丸器，傳輸有效率好，拋丸量大。

3、風選剝離 器、丸砂剝離 率大過99%。

4、彈丸包裹平均，無拋丸盲區。

5、耐磨橡膠件安全使用生命周期長，調整快速。

6、設施低噪音污染運轉。

7、高壓電子產品分為繼電子產品（或PLC）操縱，操縱柜、聲光控開關警報器保護裝置，PC采取歐姆龍該該品牌，通常原配件采取歐姆龍合資該品牌該該品牌控制非常簡單、能信。

Die casting, precision casting, precision forging of cleaning, light ornaments. Remove heat-treated pieces, castings, forgings surface oxide skin. The  strengthening of the spring. Fasteners derusting and former processing.

1. Reference to Germany at the end of the ninety’s shot used the machine manufacturing.

2. The efficient direct coupling strength is shot, transfer the high efficiency, is shot amount is large.

3. Efficient wind separator, pill isolating rate of more than 99% of sand.

4. Projectile enclothe even, without peen-forming blind angle.

5. Wear parts of long service life, change quickly.

6. Low noise operation.

7. Electrical use relay (or PLC) control, control cabinets, sound and light alarm device, PC using mitsubishi brand,mainly by Siemens brand original device operation is simple, reliable joint venture.

◆最主要的科技參數值 Main technical parameters