噴涂工藝機械設備款型

STR-NKP-1型通風管道罐壁涂裝器  Spraying machine for piping inner wall

◆適用于依據 Applicable scope

應用來圓孔及中型機氣流輸送途徑的內壁上噴藝術漆工藝，它是巧用無氣噴藝術漆機氣流輸送來的髙壓藝術漆，順利通過特別制作的噴頭，使藝術漆做霧化后真接轉變成音響喇叭形（園圓錐形、實心），勻地噴在氣流輸送途徑內外表，可以達到氣流輸送途徑的噴藝術漆工藝。 NKP-1型核心使適用Ф50-Ф300mm的管，膩子粉凝固點只能多于80秒（4號福特杯）。假如漆粘稠度低過80秒，要加萃取劑兌水。NKP-1型大致上不主輸送管道大小限止，但最容易不長而15米。

Apply YuXiaoKong and medium pipe wall coating, it is to use it without gas transmission to high voltage coating, through the special nozzle, to make the paint spray directly formed after flared (garden tapered, hollow), evenly spray in the pipe inner surface, so as to realize the pipe coating. NKP-type 1 is mainly used in Ф 50-Ф 300 mm pipe, coating viscosity shall not be higher than the 80 seconds (4 ford cup). If the paint is higher than 80 seconds, viscosity should be diluted solvent. NKP-type 1 basically from piping length restrictions, but had better not longer than 15 meters.

的安裝方框圖 Installation to which