制冷式冷空氣太干機
◆產品設備共同點 Product features
制熱及氧氣系統,經科研專家最準計算出,設計方案性能參數均留20%上面的的數量。空調制熱文件冰柜降低機用到翻轉視頻式或渦旋降低機式、缸筒式全開敞空調制熱文件冰柜降低機及半開敞螺絲桿式空調制熱文件冰柜降低機(20HP以上內容),作業安全穩定,低頻噪音低,能力靠普,空調省電使用時間長。功效比好,安全防護高等級為IP54(防污及防濺)
熱調換器、風冷凝劑器選購可信賴空調銅管帶純鋁鰭片,攏流成分熱交換勞動生產率好、以至比熱容小,成分密集。筒身原材料選購不銹鋼裝飾管嗎或合金鋼熱渡,可以防對降低冷空氣的再次嚴重污染。致冷抑制開關元件耐腐蝕性美麗。具備著熱電廠擴張閥的節流降血壓功效,暑氣旁通閥的勢能可以調節功效,過瞬時電流、過載荷、氟利昂進行高壓保護性等功效。
汽液隔離器選取風暴隔離與不銹鋁合金絲網捕霧有機肥料緊密結合,具備有汽液隔離體驗恢復,預防水分含量的三次揮發,加強組織領導冷干機的烘干體驗。它比風暴隔離器性好,而且又比過慮式汽液隔離器食用成體低,具備有性性價比。水氣液分離器器為好的低翅無縫鋼管,慢河水、多沖程,熱交換轉化率好,經常食用不適宜水垢。自主排出污水器按需安裝,除水加節省,體驗好;浮球式,網上訂時可選擇擇。外定子冷散熱器風扇,大風大雨量、低躁聲,高頻停啟長使用時間。
耐壓核心部件機器設備形式的設計適度,有利于保護保養;表面上熱噴塑,形態整潔,不銹蝕的;無基礎上安裝使用,運轉平穩性無運動,維修服務率低,無需要量品,運轉花銷少,連續不斷運轉無可人員守侯。
Refrigeration and air system, the experts accurate calculation, design parameters are left more than 20% of the surplus. Refrigeration compressors adopt international advanced rotary or scroll type, piston enclosed refrigeration compressor and close partly screw refrigeration compressor (20 HP above), stable operation, low noise, reliable performance, save electricity long life. Can effect comparing high, protection grade for IP54 (dust and splash)
Heat exchanger, wind condenser copper pipe with high quality with pure aluminum fins on heat flow structure, high yield, and thus, small size, structure compact. The cylinder body materials selecting stainless steel or carbon steel galvanized, can avoid to compressed air of the secondary pollution. Refrigeration control elements adopt the most advanced Denmark danfoss (DANROSS) and the Persian LAN (SPORLAN), (ALCO) refrigeration components, excellent performance. Thermal expansion valve with the throttling step-down function, heat the by-pass energy adjustment function, over electric current, the load, cold media high voltage protection.
Liquid-vapor separator using whirlwind separation and stainless steel wire the organic combination of the trap with gas liquid separation effect of moisture, avoid completely secondary evaporation, ensure the blotting etc.is dry effect. It than cyclone separator performance is good, at the same time than a gas-liquid separator filter brand-newly type use adult, and has a low price is high performance. Water condenser copper pipe for high quality, low wing, stroke, slow flow in high thermal efficiency, use for a long time shoulds not be scaled. Automatic drainage device according to the needs, in addition to water and energy saving set, the effect is good; Float type, electronic timing can choose.The cold wind, big rotor fan air, low noise, long life. Stop frequent rev.
Parts are confined by national gb1501998 "steel pressure vessel" and GB151-1999 "tubular heat exchanger of manufacture, test and check and accept," pressure vessel safety technology supervision code "supervision. Equipment structure design is reasonable, facilitate maintenance; The surface heat spraying, beautiful appearance, not rust; No basis installation, smooth operation no vibration, maintenance rate is low, no consumables, operation cost less, without waiting for continuous operation special.
工程狀況要求與能力指標英文 Working condition and technical indexes | |
進氣室內溫度 The inlet temperature |
室溫型≤50℃,高溫作業型≤80℃ |
制冷方試 Cooling way |
風冷(油冷) |
生態工作溫度 Environment temperature |
≤40℃(風冷) |
壓力值露點 Pressure dew point |
1.7℃~10℃(0.7 MPa) |
空調制熱劑 Refrigerants |
R-22或基于合作方的標準可進行R134a,R404 a,R507等無氟節能減排安真小編劑。 |
進氣負擔 The inlet pressure |
0.2~1.0MPa(6.4 MPa以下的容忍進貨) |
經濟壓力財產損失 The pressure loss |
≤0.02 MPa |
冷卻液水進水的體溫 Cooling water inlet water temperature |
≤32℃(水冷散熱) |
放置冷卻液接觸不良水壓 Cooling water feed water pressure |
0.15~0.4 MPa(水冷散熱器) |
◆重點的技術主要參數 Main technical parameters
ADH |
-5F |
-10F |
-20F |
-30F |
-60F |
-75F |
-120F |
-150F |
-200F |
-250F |
-300F |
-400F | |
正確產水量 Capacity m3/min |
0.7 |
1.6 |
2.6 |
3.8 |
7.0 |
8.5 |
13.5 |
17 |
23 |
27 |
34 |
45 | |
的工作水壓 Work pressure |
| ||||||||||||
露點水溫 Dew point temperature |
| ||||||||||||
安真小編劑 Refrigerants |
R-12 |
| |||||||||||
電源適配器 Power |
|
| |||||||||||
收縮機電率 Compressor power(KW) |
0.18 |
0.28 |
0.6 |
0.75 |
1.1 |
1.3 |
2.2 |
2.9 |
3.7 |
4.8 |
5.5 |
7.5 | |
小風扇三相異步電機最大功率 Fan motor power(W) |
30 |
170 |
170 |
180 |
300 |
300 |
510 |
510 |
600 |
720 |
900 |
1200 | |
接口協議長寬高 Interface size |
ZG1/2" |
ZG1" |
ZG1" |
ZG1.5" |
ZG1.5" |
ZG2" |
DN80FL |
DN80FL |
DN80FL |
DN80FL |
DN80FL |
DN80FL | |
樣貌面積 Appearance and size |
長L(mm) |
530 |
800 |
800 |
800 |
1100 |
1100 |
1550 |
1400 |
1550 |
1800 |
1900 |
2000 |
寬W(mm) |
360 |
450 |
450 |
450 |
600 |
600 |
650 |
780 |
780 |
780 |
950 |
950 | |
高H(mm) |
490 |
970 |
970 |
970 |
1250 |
1250 |
1480 |
1580 |
1580 |
1580 |
1800 |
1800 | |
總重量 Weight(kg) |
50 |
95 |
100 |
100 |
210 |
250 |
350 |
470 |
550 |
650 |
800 |
1000 |