降解式晾干機

◆護膚品特別 Product features

※具有著穩定可靠同步的吸氣學習壓力和露點

1.吸咐塔之超高與截面積經測試報告單精密儀器折算，塔床空氣阻力小，切實保障了縮小其他氣體干燥處理劑5秒的相處日子，提供原料氣的露點規定要求。

2.30％的干熱劑數量，使用賠償金干熱劑的自然美氧化，切實保障干熱。

3.巨型吸附器，抓好氣體粗糙依據粗糙劑層，去除溝流這種現象。

※二次利用氣量損耗費需小于14％

1.領航的機筒裝修設計，永久保存100％的樹脂吸附熱能，存放的熱能用以提升凈化特性一階段的凈化特性氣工作溫度，加強裝置的解吸特性，可使凈化特性更充分。

2.非常干燥和可粉碎選取反相熱對流情況報告，濕空氣當中走過干的氣體吸附劑有效期果較好。可粉碎氣外貿出口含濕量把握在亞飽和點睡眠狀態，使消音器原理器及res排氣過道無冷凝水之慮。

3.可通過缺水機的使用電動機扭矩實際需求調試恢復利用能力氣含量，狠抓恢復利用能力氣體連繼穩定性高，恢復利用能力負壓低至臨界點。

※干燥的劑便用耐用度長

1.該用的機筒長度，使氣體用干澀劑層的氣速和時長持續好的形態，積極充分利用干澀劑的性能參數。

2.合理合法的設計搭配，在氣體流動進去機筒前，經除油正確處理立即快速清理氣體流動中內含油量物與重感染物，減少非常干燥劑層受感染。

※設備運用了有新意高品級電動式及手動閥和靠譜的全電子設備可程序編程序的控制板，人與機器游戲界面信賴，會自動連著展現雙塔生產，循環往復頻次當場可編，量產沒置10min。止回閥使用期短短50萬次瑜伽動作。

※筒節外壁作冷鍍鋅鋼防銹工作工作，10年不生銹。

※運行較準、性能參數相對穩定、操作方法方便，連接不能不根基。

※Bend it out on the same has the stable pressure and dew point

1. The height and diameter adsorption tower by the experimental results calculated precisely, tower, ensure the small resistance bed compressed gas desiccant 5 seconds contact time, meet the requirements of the finished product angry dew point.

2.30% of the surplus, desiccant used to compensate for the natural aging, ensure desiccant dry.

3. Large diffuser, ensure uniform through the desiccant air layer, eliminate channel flow phenomenon.

※Bend the gas loss less than 14% renewable

1. Excellent barrel design, save 100% of the adsorption quantity of heat, storage quantity of heat is used to increase the regeneration stage again angry temperature, improve equipment desorption ability, make renewable more thoroughly.

2. Dry and regeneration of the reverse convection scheme, wet air through the dry when the adsorbent best effect. Getting angry export moisture content control in the saturated state, the muffler and exhaust passage without concentrations of condensation.

3. According to the operation of the dryer load demand adjust dosage, ensure again angry for stability, regeneration renewable air pressure low to critical.

※Bend desiccant long service life

1. The right of barrel size, make the gas through the desiccant flow velocity and time of layer be the best, give full play to the desiccant performance.

2. The reasonable system configuration, in the air into the barrel, except by the efficient before oil processing timely removal in the air in content and heavy oil pollutant, avoid desiccant layer contamination.

※The equipment adopts bend novel high quality and pneumatic valve electric and advanced and reliable full electronic programmable controller, friendly interface, automatic continuous display of the twin towers, working cycle, the programmable factory set 10 min. The valve life for 500000 times action.

※Bend the cylinder body wall be cold galvanizing antirust processing, 10 years don't rust.

※Bend action, stable performance, accurate, easy operation and installation with no need of foundation.

◆常見技術性參數設置 Main technical parameters